Client Culinary Specialties
Location San Marcos, CA
A catering business contacted ASAP Drain Guys & Plumbing to reroute the cold water line and install ball valves. ASAP provided an estimate and the customer approved it.
The ASAP technician rerouted a single line of up to 25 feet in length and 5 drill points. It was rerouted into two separate 3/4″ cold water lines from the 1 1/2″ water main in the attic space. The first 3/4″ line would run up to 20ft to the soap dispenser until below and ball valve for line isolation. The 2nd line would have an isolation valve as well and run about 80ft to the farthest two soap dispensers. This required several anchor points in type L copper.
There are also several spots of corrosion in existing water lines that pose a leak hazard in the future. The customer was made aware of this.
The technician also replaced two 3/4″ full port ball valves.